Nissan 2011 Cube User Manual download pdf (Page 326)

Black plate (324,1)

Model "Z12-D" EDITED: 2010/ 9/ 27

6. Mark the center of the holes

*

D

with a felt-

tip pen.

7. Carefully drill the two pilot holes using a

0.39 in (10 mm) drill bit at the marked

locations. (Be sure that the drill only

goes through the bumper fascia.)

8. Insert grommets into the hole on the fascia.

9. Insert a flat-blade screwdriver into the

grommet hole to add a 908 turn onto the

part

*

E

.

10. Insert a J-nut into the license plate bracket

before placing the license plate bracket on

the fascia.

11. Install the license plate bracket with the

screws.

12. Install the license plate with bolts that are

not longer than 0.55 in (14 mm).

STI0648

9-12 Technical and consumer information

1 2 ... 321 322 323 324 325 326 327 328 329 330 331 ... 344 345

Comments to this Manuals

No comments