Nissan 2011 Cube User Manual download pdf (Page 237)

Black plate (235,1)

Model "Z12-D" EDITED: 2010/ 9/ 27

PRECAUTIONS ON CRUISE CON-

TROL

. If the cruise control system malfunctions, it

will cancel automatically. The CRUISE in-

dicator light on the meter panel will then

blink to warn the driver.

. If the engine coolant temperature becomes

excessively high, the cruise control system

will cancel automatically.

. If the CRUISE indicator light blinks, turn the

cruise control MAIN switch off and have the

system checked by a NISSAN dealer.

. The CRUISE indicator light may blink when

the cruise control MAIN switch is turned ON

while pushing the RESUME/ACCELERATE,

SET/COAST or CANCEL switch. To prop-

erly set the cruise control system, perform

the following procedures.

WARNING

Do not use the cruise control when

driving under the following conditions:

. when it is not possible to keep the

vehicle at a set speed

. in heavy traffic or in traffic that

varies in speed

. on winding or hilly roads

. on slippery roads (rain, snow, ice,

etc.)

. in very windy areas

Doing so could cause a loss of vehicle

control and result in an accident.

CAUTION

On Manual Transmission (MT) models,

do not shift into N (Neutral) without

depressing the clutch pedal when the

cruise control is set. Should this occur,

depress the clutch pedal and turn the

MAIN switch off immediately. Failure to

do so may cause engine damage.

SSD0861

1. RESUME/ACCELERATE switch

2. SET/COAST switch

3. CANCEL switch

4. MAIN (ON·OFF) switch

CRUISE CONTROL OPERATIONS

The cruise control allows driving at a speed

between 25 to 89 MPH (40 to 144 km/h)

without keeping your foot on the accelerator

pedal.

To turn on the cruise control, push the MAIN

switch on. The CRUISE indicator light will

illuminate.

To set cruising speed, accelerate the vehicle

to the desired speed, push the SET/COAST

CRUISE CONTROL (if so equipped)

Starting and driving 5-21

1 2 ... 232 233 234 235 236 237 238 239 240 241 242 ... 344 345

Comments to this Manuals

No comments