Nissan 2011 Cube User Manual download pdf (Page 238)

Black plate (236,1)

Model "Z12-D" EDITED: 2010/ 9/ 27

switch and release it. Take your foot off the

accelerator pedal. Your vehicle will maintain the

set speed.

. To pass another vehicle, depress the

accelerator pedal. When you release the

pedal, the vehicle will return to the previously

set speed.

. The vehicle may not maintain the set speed

on winding or hilly roads. If this happens,

drive without the cruise control.

To cancel the preset speed, use one of the

following methods:

a) Push the CANCEL switch.

b) Tap the brake pedal.

c) Turn the MAIN switch off. The CRUISE

indicator light will turn off.

. If you depress the brake pedal while pushing

the RESUME/ACCELERATE or SET/

COAST switch and reset at the cruising

speed, the cruise control will disengage.

Turn the MAIN switch off once and then turn

it on again.

. The cruise control will automatically cancel if

the vehicle slows more than 8 MPH (12

km/h) below the set speed.

. If you move the selector lever to the N

(Neutral) position (Continuously Variable

Transmission models) or depressing the

clutch pedal (Manual Transmission models),

the cruise control will be canceled.

To reset at a faster cruising speed, use one

of the following methods:

. Depress the accelerator pedal. When the

vehicle attains the desired speed, push and

release the SET/COAST switch.

. Push and hold the RESUME/ACCELERATE

switch. When the vehicle attains the desired

speed, release the switch.

. Push, then quickly release the RESUME/

ACCELERATE switch. Each time you do

this, the set speed will increase by about 1

MPH (1.6 km/h).

To reset at a slower cruising speed, use one

of the following methods:

. Lightly tap the brake pedal. When the

vehicle attains the desired speed, push the

SET/COAST switch and release it.

. Push and hold the SET/COAST switch.

Release the switch when the vehicle slows

down to the desired speed.

. Push, then quickly release the SET/COAST

switch. Each time you do this, the set speed

will decrease by about 1 MPH (1.6 km/h).

To resume th e preset speed, push and

release the RESUME/ACCELER ATE switch.

The vehicle will resume the last set cruising

speed when the vehicle speed is over 25 MPH

(40 km/h).

5-22 Starting and driving

1 2 ... 233 234 235 236 237 238 239 240 241 242 243 ... 344 345

Comments to this Manuals

No comments