Nissan 2011 Cube User Manual download pdf (Page 226)

Black plate (224,1)

Model "Z12-D" EDITED: 2010/ 9/ 29

SSD0859

PUSH-BUTTON IGNITION SWITCH

OPERATION

When the ignition switch is pushed without

depressing the brake pedal, the ignition switch

position will change as follows:

. Push center once to change to ACC.

. Push center two times to change to ON.

. Push center three times to change to OFF.

. Push center four times to return to ACC.

. Open or close any door to return to LOCK

during the OFF position.

The indicator light

on the ignition switch

illuminates when the ignition switch is in the

ACC or ON position.

The ignition switch is equipped with an anti-theft

steering lock device.

In order for the steering wheel to be locked, it

must be turned about 1/6 to the right or left from

the straight up position.

To lock the steering wheel, push the

ignition switch to the OFF position. To

unlock the steering wheel, push the igni-

tion switch.

If the ignition switch position does not

change from LOCK when pushing the

ignition switch, turn the steering wheel

right and left, then push the ignition switch

again.

If the battery of the vehicle is discharged,

the push-button ignition switch position

cannot be moved from the LOCK position.

Some indicators and warnings for operation are

displayed on the meter. (See “WARNING/

INDICATOR LIGHTS AND AUDIBLE REMIN-

DERS” in the “2. Instruments and controls”

section.)

The ignition lock is designed so that the ignition

switch position cannot be switched to LOCK

until the selector lever is moved to the P (Park)

position.

When the ignition switch cannot be pushed

toward the LOCK position, proceed as follows:

1. Move the selector lever into the P (Park)

position.

2. Push the ignition switch to the OFF position.

3. Open the door. The ignition switch will

change to the LOCK position.

The selector lever can be moved from the P

(Park) position if the ignition switch is in

the ON position and the brake pedal is

depressed.

STEERING LOCK (if so equippe d)

In order for the steering wheel to be locked, it

must be turned about 1/8 of a right or left turn

from the straight up position.

To lock the steering wheel, PUSH the ignition

switch to th e OFF position. To unlock the

steering wheel, push the ignition switch.

PUSH-BUTTON IGNITION SWITCH

POSITIONS

LOCK (Normal parking position)

The ignition switch can only be locked in this

position.

The ignition switch will be unlocked when it is

pushed to the ACC position while carrying the

Intelligent Key.

5-10 Starting and driving

1 2 ... 221 222 223 224 225 226 227 228 229 230 231 ... 344 345

Comments to this Manuals

No comments

Nissan 2011 Cube User Manual Page 226

Comments to this Manuals

Related products and manuals for Cars Nissan 2011 Cube