Nissan 2011 Cube User Manual download pdf (Page 247)

Black plate (245,1)

Model "Z12-D" EDITED: 2010/ 9/ 27

To use the engine block heater

1. Turn the engine off.

2. Open the hood and unwrap the engine

block heater cord.

3. Plug the engine block heater cord into a

grounded 3-wire, 3-pronged extension cord.

4. Plug the extension cord into a Ground Fault

Interrupt (GFI) protected, grounded 110-

volt AC (VAC) outlet.

5. The engine block heater must be plugged in

for at least 2 - 4 hours, depending on

outside temperatures, to properly warm the

engine coolant. Use an appropriate timer to

turn the engine block heater on.

6. Before starting the engine, unplug and

properly store the cord to keep it away from

moving parts.

WARNING

. Do not use your engine block heater

with an ungrounded electrical sys-

tem or a 2-pronged adapter. You can

be seriously injured by an electrical

shock if you use an ungrounded

connection.

. Disconnect and properly store the

engine block heater cord before

starting the engine. Damage to the

cord could result in an electrical

shock and can cause serious injury.

. Use a heavy-duty 3-wire, 3-pronged

extension cord rated for at least

10A. Plug the extension cord into a

Ground Fault Interrupt (GFI) pro-

tected, grounded 110-VAC o utlet.

Failure to use the proper extension

cord or a grounded outlet can result

in a fire or elect rical sh ock and

cause serious personal injury.

Starting and driving 5-31

1 2 ... 242 243 244 245 246 247 248 249 250 251 252 ... 344 345

Comments to this Manuals

No comments