Nissan 2011 Cube User Manual Page 306

  • Download
  • Add to my manuals
  • Print
  • Page
    / 345
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 305
Black plate (304,1)
Model "Z12-D" EDITED: 2010/ 9/ 27
SDI1949
Checking the tire pressure
1. Remove the valve stem cap from the
tire.
2. Press the pressure gauge squarely onto
the valve stem. Do not press too hard or
force the valve stem sideways, or air will
escape. If the hissing sound of ai r
escaping from the tire is heard while
checking the pressure, reposition the
gauge to eliminate this leakage.
3. Remove the gauge.
4. Read the tire pressure on the gauge
stem and compare it to the specifica-
tion shown on the Tire and Loading
Information label.
5. Add air to the tire as needed. If too
much air is added, press the core of the
valve stem briefly with the tip of the
gauge stem to release pressure. Re-
check the pressure and add or release
air as needed.
6. Install the valve stem cap.
7. Check the pressure of all other tires,
including the spare.
SIZE
COLD TIRE
INFLATION
PRESSURE
FRONT
ORIGINAL
TIRE
P195/60R15
87H
230 kPa,
33 PSI
P195/55R16
86V
230 kPa,
33 PSI
REAR
ORIGINAL
TIRE
P195/60R15
87H
230 kPa,
33 PSI
P195/55R16
86V
230 kPa,
33 PSI
SPARE
TIRE
T125/70D15
420 kPa,
60 PSI
SDI1575
Example
TIRE LABELING
Federal law requires tire manufacturers to
place standardized information on the side-
wall of all tires. This information identifies
and describes the fundamental character-
istics of the tire and also provides the tire
identification number (TIN) for safety stan-
dard certification. The TIN can be used to
identify the tire in case of a recall.
8-32 Maintenance and do-it-yourself
Page view 305
1 2 ... 301 302 303 304 305 306 307 308 309 310 311 ... 344 345

Comments to this Manuals

No comments