Nissan 2011 Cube User Manual download pdf (Page 160)

Black plate (158,1)

Model "Z12-D" EDITED: 2010/ 9/ 27

SAA3569

Backing up behind a projecting object

The position

*

C

is shown further than the

position

*

B

in the display. However, the

position

*

C

is actually at the same distance

as the position

*

A

. The vehicle may hit the

object when backing up to the position

*

A

if

the object projects over the actual backing up

course.

HOW TO ADJUST THE SCREEN

To adjust the Brightness and Contrast of the

RearView Monitor, push the SETUP button until

the desired mode is displayed with the RearView

Monitor on, and turn the TUNE control dial to

adjust the brightness and contrast of the screen

to the preferred level.

OPERATING TIPS

. When the selector lever is shifted to the R

(Reverse) position, the monitor screen auto-

matically changes to the RearView Monitor

mode. However, the radio can be heard.

. It may take some time until the RearView

Monitor or the normal screen is displayed

after the selector lever has been shifted to R

from another position or to another position

from R. Objects may be distorted momenta-

rily until the RearView Monitor screen is

displayed completely.

. When the temperature is extremely high or

low, the screen may not clearly display

objects. This is not a malfunction.

. When strong light directly enters the cam-

era, objects may not be displayed clearly.

This is not a malfunction.

. Vertical lines may be seen in objects on the

screen. This is due to strong reflected light

from the bumper. This is not a malfunction.

. The screen may flicker under fluorescent

light. This is not a malfunction.

. The colors of objects on the RearView

Monitor may differ somewhat from those of

the actual object.

. Objects on the monitor may not be clear in a

dark place or at night. This is not a

malfunction.

. If dirt, rain or snow attaches to the camera,

the RearView Monitor may not clearly dis-

play objects. Clean the camera.

. Do not use alcohol, benzine or thinner to

clean the camera. This will cause discolora-

tion. To clean the camera, wipe with a cloth

dampened with diluted mild cleaning agent

and then wipe with a dry cloth.

. Do not damage the camera as the monitor

screen may be adversely affected.

. Do not use wax on the camera window.

Wipe off any wax with a clean cloth

dampened with mild detergent diluted with

water.

4-12 Heater, air conditioner, audio and phone systems

1 2 ... 155 156 157 158 159 160 161 162 163 164 165 ... 344 345

Comments to this Manuals

No comments