Nissan R35-D User Manual download pdf (Page 51)

Black plate (46,1)

Model "R35-D" EDITED: 2008/ 5/ 20

Rear facing — step 3

3. For child restraints that are equipped with

webbing mounted attachments, remove any

additional slack from the anchor attach-

ments. Press downward and rearward firmly

in the center of the child restraint with your

hand to compress the vehicle seat cushion

and seatback while tightening the webbing

of the anchor attachments.

Rear facing — step 4

4. After attaching the child restraint, test it

before you place the child in it. Push it from

side to side while holding the seat near the

LATCH attachment or by the seat belt path.

The child restraint should not move more

than 1 inch (25 mm) from side to side. Try to

tug it forward and check to see if the belt

holds the restraint in place. If the restraint is

not secure, tighten the belt as necessary, or

put the restraint in another seat and test it

again. You may need to try a different child

restraint. Not all child restraints fit in all types

of vehicles.

5. Check to make sure the child restraint is

properly secured prior to each use. If the

child restraint is loose, repeat steps 3

through 4.

1-20 Safety — Seats, seat belts and supplemental restraint system

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 310 311

No comments

Nissan R35-D User Manual Page 51