Nissan R35-D User Manual download pdf (Page 205)

Black plate (200,1)

Model "R35-D" EDITED: 2008/ 5/ 20

2. Accelerate your vehicle t o the desired

speed, push the SET/COAST switch and

release it. (The SET indicator will illuminate

in the instrument panel.) Take your foot off

the a ccelerator pedal. Your vehicle will

maintain the set speed.

NOTE:

If the vehicle speed reaches approximately

3 MPH (5 km/h) over the set speed, the set

speed on the vehicle information display

blinks.

Passing another vehicle

To pass another vehicle, depress the accelerator

pedal. When you release the pedal, the vehicle

will return to the previously set speed.

Increasing the set vehicle speed

To reset at a faster cruising speed, use one of

the following methods:

. Depress the accelerator pedal. When the

vehicle attains the desired speed, push and

release the SET/COAST switch.

. Push and hold the RESUME/ACCELERATE

switch. When the vehicle attains the speed

you desire, release the switch.

. Push and then quickly release the RESUME/

ACCELERATE switch. Each time you do

this, the set speed will increase by about 1

MPH (1.6 km/h).

Decreasing the set vehicle speed

To reset at a slower cruising speed, use one of

the following methods:

. Lightly tap the brake pedal. When the

vehicle attains the desired speed, push

and release the SET/COAST switch.

. Push and hold the SET/COAST switch.

Release the switch when the vehicle slows

down to the desired speed.

. Push and then quickly release the SET/

COAST switch. Each time you do this, the

set speed will decrease by about 1 MPH

(1.6 km/h).

Resuming the preset speed

To resume the preset speed, push and release

the RESUME/ACCELERATE switch. The vehicle

will resume the last set cruising speed when the

vehicle speed is over 25 MPH (40 km/h).

5-30 Starting and driving

1 2 ... 200 201 202 203 204 205 206 207 208 209 210 ... 310 311

Comments to this Manuals

No comments