Nissan 2015 Murano - Owner's Manual User Manual

®2015 MURANOOWNER’S MANUALFor your safety, read carefully and keep in this vehicle.2015 NISSAN MURANO Z52-DZ52-DPrinting : September 2014 (01)Public

0 Illustrated table of contentsAir bags, seat belts and child restraints ...0-2Exterior front ...0-3Exte

OperationThe MIL will come on in one of two ways:● MIL on steady — An emission control systemmalfunction has been detected. Check thefuel-filler cap i

Turn signal/hazard indicatorlightsThe appropriate light flashes when the turn signalswitch is activated.Both lights flash when the hazard switch is tu

The vehicle information display is located to theleft of the speedometer. It displays such items as:● Vehicle settings● Trip computer information● Dri

The OK, and buttons alsocontrol audio and control panel functions. Foradditional information, refer to “Steering wheelswitch for audio control” in “Mo

Car Icon ColorThe color of the vehicle that displays in the ve-hicle information display when the ignition switchis placed in the ON position can be c

WipersThe speed dependent feature can be set to beON or OFF. From the Wipers menu, select“Speed Dependent”. Use the OK button to turnthis feature ON o

to the separate Navigation Owner’s Manual. Usetheor button to choose from hefollowing menu options:● Mileage/Fuel● Tire Pressures● Temperature● Langua

LIC30302-20 Instruments and controls

VEHICLE INFORMATION DISPLAYWARNINGS AND INDICATORS1. Engine start operation2. No Key Detected3. Shift to Park4. Key Battery Low5. Engine start operati

Engine start operation for Intelligent Keysystem (if I-Key battery level is low)This indicator appears when the battery of theIntelligent Key is low a

1. Supplemental front-impact air bags(P. 1-47)2. Occupant classification sensor (weightsensor) (P. 1-47)3. Seat belts (P. 1-13)4. Head restraints/head

low oil level. The low oil pressure warning isnot designed to indicate a low oil level. Usethe dipstick to check the oil level. For additionalinformat

Transmission Shift Position IndicatorThis indicator shows the transmission shift posi-tion.CVT Error: See Owner’s ManualThis warning illuminates when

ways secure your vehicle even if parking for abrief period. Never leave your Intelligent Key inthe vehicle, and always lock the vehicle whenunattended

NOTE:Changes or modifications not expressly ap-proved by the party responsible for compli-ance could void the user’s authority to op-erate the equipme

If the windshield wiper operation is interrupted bysnow or ice, the wiper may stop moving to protectits motor. If this occurs, turn the wiper switch t

WARNINGIn freezing temperatures the washer solu-tion may freeze on the window and ob-scure your vision. Warm the rear windowwith the defroster before

To defrost the rear window glass and outsidemirrors (if so equipped), start the engine andpush the rear window defroster switch on. Therear window def

CAUTIONUse the headlights only with the enginerunning to avoid discharging the vehiclebattery.Autolight systemThe autolight system allows the headligh

Be sure you do not put anything on top ofthe autolight sensor located in the top side䊊1of the instrument panel. The autolightsensor controls the autol

INSTRUMENT BRIGHTNESSCONTROLPush the “-” button䊊Ato decrease the bright-ness of instrument panel lights when driving atnight.Push the “+” button䊊Bto i

1. Front view camera (if so equipped)(P. 4-12)2. Engine hood (P. 3-21)3. Windshield wiper and washer switch,wiper blades (P. 2-26,8-19)4. Windshield (

FOG LIGHT SWITCH (if so equipped)To turn the fog lights on, turn the headlight switchto theposition, then turn the fog lightswitch to theposition.To t

NOTE:If the surface temperature of the steeringwheel is above 68°F (20°C) when the switchis turned on, the system will not heat thesteering wheel. Thi

● When cleaning the seat, never usegasoline, benzine, thinner, or any simi-lar materials.● If any malfunctions are found or theheated seat does not op

The 2nd row seats are warmed by built-in heat-ers. The switches are located on the rear of thefront center console and can be operated inde-pendently

4. When the vehicle’s interior is warmed orcooled, or before you leave the vehicle, besure to turn the control knob to the Off(center) position. The i

12V OUTLETSThe power outlets are for powering electricalaccessories such as cellular telephones. Theyare rated at 12 volt, 120W (10A) maximum.The fron

● Push the plug in as far as it will go. Ifgood contact is not made, the plug mayoverheat or the internal temperaturefuse may open.● When not in use,

SUNGLASSES HOLDERTo open the sunglasses holder, push and release.Only store one pair of sunglasses in the holder.WARNINGKeep the sunglasses holder clo

CAUTIONDo not recline the rear seatback when youuse the cup holders on the rear armrest.Doing so may cause the beverages to spillover, and if they are

GLOVE BOXOpen the glove box by pulling the handle.Use the master key to lock or unlock the glovebox. The valet key cannot be used to lock orunlock the

1. Antenna (P. 4-30)2. Rear window wiper and washer switch(P. 2-28)3. Liftgate release (P. 3-21)4. Rearview camera (P. 4-2)5. Replacing bulbs (P. 8-26

LUGGAGE HOOKSWhen securing items using luggage hooks lo-cated on the back of the seat or side finisher donot apply a load over more than 6.5 lbs (29 N

Do not apply any load directly to the roof siderails. Cross bars must be installed before apply-ing load/cargo/luggage to the roof of the vehicle.Be c

1. Window lock button2. Power door lock switch3. Driver side automatic switch4. Front passenger side switch5. Left rear passenger side switch6. Right

Rear power window switchThe rear power window switches open or closeonly the corresponding windows. To open thewindow, push the switch and hold it dow

The moonroof will only operate when the ignitionswitch is placed in the ON position. The moon-roof is operational for a period of time, even if theign

WARNING● In an accident you could be thrown fromthe vehicle through an open moonroof.Always use seat belts and childrestraints.● Do not allow anyone t

When the ON switch䊊1is pressed, the footwelllights (if so equipped), step lights (if soequipped), map lights and rear personal lightswill automaticall

Push the button to turn the map lights on. To turnthem off, press the button again.CAUTIONDo not use for extended periods of timewith the engine stopp

WARNING● Do not use the HomeLink® UniversalTransceiver with any garage dooropener that lacks safety stop and re-verse features as required by federals

3. Press and hold the programmedHomeLink® button and observe the indica-tor light.● If the indicator light䊊1issolid/continuous, programming iscomplete

1. Glove box (P. 2-39)2. Console box (P. 2-39)3. Map lights (P. 2-50)4. Power moonroof (if so equipped)(P. 2-47)5. Luggage hooks (P. 2-39)6. Center ar

matically stop transmitting. Continue topress and hold the desired HomeLink® but-ton while you press and re-press (“cycle”)your hand-held transmitter

2. The indicator light will begin to flash after20 seconds. Without releasing theHomeLink® button, proceed with “Pro-gramming HomeLink®” - Step 1.For

MEMOInstruments and controls 2-55

3 Pre-driving checks and adjustmentsKeys...3-2NISSAN Intelligent Key® . ...3-2Doors ...

Entry/exit function ...3-36Setting memory function...3-36System operation...

1. Intelligent Key (two sets)2. Mechanical key3. Key number plate (one plate)NISSAN INTELLIGENT KEY®Your vehicle can only be driven with the Intellige

A key number plate is supplied with your keys.Record the key number and keep it in a safe place(such as your wallet), not in the vehicle. If you losey

CAUTIONAlways carry the mechanical key installedin the Intelligent Key slot.For additional information, refer to “Doors” in thissection.Valet hand-off

PowerThe power door lock system allows you to lock orunlock all doors at the same time.Turning the key toward the front䊊1of the vehiclelocks all doors

LOCKING WITH POWER DOORLOCK SWITCHTo lock all the doors without a key, push the doorlock switch (driver’s or front passenger’s side) tothe lock positi

1. Vent (P. 4-25)2. Headlight/fog light (if so equipped)/turnsignal switch (P. 2-29)3. Supplemental front-impact air bag(P. 1-47)4. Meters, gauges, wa

CHILD SAFETY REAR DOOR LOCKChild safety locks help prevent the rear doorsfrom being opened accidentally, especially whensmall children are in the vehi

In such cases, correct the operating conditionsbefore using the Intelligent Key function or usethe mechanical key.Although the life of the battery var

DOOR LOCKS/UNLOCKSPRECAUTION● Do not push the door handle request switchwith the Intelligent Key held in your hand asillustrated. The close distance t

Locking doors1. Move the shift lever to the P (Park) position,place the ignition switch in the LOCK posi-tion and make sure you carry the IntelligentK

Lockout protectionTo prevent the Intelligent Key from being acci-dentally locked in the vehicle, lockout protectionis equipped with the Intelligent Ke

NOTE:Request switches for all doors and liftgatecan be deactivated when the Intelligent KeyDoor Lock setting is switched to OFF in theVehicle Settings

Locking doors1. Place the ignition switch in the LOCK posi-tion.2. Close all doors.3. Press thebutton on the IntelligentKey.4. The hazard warning ligh

NOTE:The unlocking operation can be changed inSelective door unlock in the Vehicle Set-tings of the vehicle information display. Foradditional informa

Using the panic alarmIf you are near your vehicle and feel threatened,you may activate the panic alarm to call attentionby pressing and holding thebut

NOTE:If you change the answer back horn andlight flash feature with the Intelligent Key,the vehicle information display screen willshow the current mo

17. Cruise control main/Intelligent CruiseControl (ICC) (if so equipped) setswitches (P. 5-32)18. Driver supplemental knee air bag(P. 1-47)19. Bluetoo

Symptom Possible Cause RemedyWhen stopping the engineThe Shift to Park warning appears on thedisplay and the inside warning chimesounds continuously.T

The button will be on the NISSAN Intelli-gent Key® if the vehicle has remote engine start.This feature allows the engine to start from out-side the ve

REMOTE STARTING THE VEHICLETo use the remote start feature to start the engineperform the following:1. Aim the Intelligent Key at the vehicle.2. Press

CONDITIONS THE REMOTE STARTWILL NOT WORKThe remote start will not operate if any of thefollowing conditions are present:● “Remote Engine Start” is tur

䊊1Pull the hood lock release handle䊊1locatedbelow the driver side instrument panel untilthe hood springs up slightly.䊊2Locate the lever䊊2in between th

OPERATING THE MANUALLIFTGATE (if so equipped)The power door lock system allows you to lock orunlock all doors including the liftgate simultane-ously.T

The hazard lights flash and a chime sounds toindicate the power open sequence has beenstarted.● The liftgate can be opened by the instrumentpanel swit

Auto Reverse:If an obstacle is detected during power open orpower close, a warning chime will sound and theliftgate will reverse direction and return

POWER LIFTGATE MAIN SWITCHThe power liftgate operation can be turned on oroff by the power liftgate main switch on theinstrument panel.When the power

Liftgate release (manual and power)The liftgate release mechanism allows the liftgateto be opened in the event of a discharged battery.To release the

VQ35DE engine1. Engine coolant reservoir (P. 8-7)2. Drive belt location (P. 8-17)3. Engine oil dipstick (P. 8-9)4. Engine oil filler cap (P. 8-9)5. Br

FUEL-FILLER CAPWARNING● Gasoline is extremely flammable andhighly explosive under certain condi-tions. You could be burned or seriouslyinjured if it i

To remove the fuel-filler cap:1. Turn the fuel-filler cap counterclockwise toremove.2. Put the fuel-filler cap on the cap holder䊊1while refueling.To i

WARNING● Do not adjust the steering wheel whiledriving. You could lose control of yourvehicle and cause an accident.● Do not adjust the steering wheel

CAUTIONFor vehicles with automatic drive posi-tioner: Failure to reset the tilt and tele-scoping functions of the steering wheel,after the vehicle’s b

䊊1To block glare from the front, swing down themain sun visor.䊊2To block glare from the side, remove themain sun visor from the center mount andswing

REARVIEW MIRROR (if so equipped)Use the night position䊊1to reduce glare fromthe headlights of vehicles behind you at night.Use the day position䊊2when

Electric control typeThe outside mirror remote control will operateonly when the ignition switch is in the ACC or ONposition.Move the small switch䊊1to

The outside mirror surface will return to its origi-nal position when any of the following have oc-curred:● The shift lever is moved to any position o

this manual, and “Tilt/Telescopic Steering”and “Outside mirrors” in this section.3. Push the SET switch and, within 5 seconds,push the memory switch (

5. If there is a desire to change to anotherIntelligent Key while in the vehicle, the usermust turn the ignition OFF and initiate com-munication from

WarninglightName PageorAnti-lock BrakingSystem (ABS) warn-ing light2-8orBrake warning light 2-8Charge warninglight2-8Engine oil pressurewarning light2

For additional information on using the Climatecontrol system, refer to “Heater and air condi-tioner (automatic)” in “Display screen, heater, aircondi

4 Display screen, heater, air conditioner,audio and phone systemsRearView Monitor without Navigation System(if so equipped) ...

Registering NissanConnectSMwith MobileApps...4-50Connect Phone ...4-50Application Do

WARNING● Positioning of the heating or air condi-tioning controls and display controlsshould not be done while driving in or-der that full attention m

● The RearView Monitor is a conveniencebut it is not a substitute for proper back-ing. Always turn and look out the win-dows, and check mirrors to be

● Vehicle width guide lines䊊5:Indicate the vehicle width when backing up.ADJUSTING THE SCREEN1. Firmly apply the brake and place the shiftlever in R (

Backing up on a steep downhillWhen backing up the vehicle down a hill, thedistance guide lines and the vehicle width guidelines are shown farther than

Backing up behind a projecting objectThe position䊊Cis shown farther than the position䊊Bin the display. However, the position䊊Cisactually at the same d

1. CAMERA buttonWhen the shift lever is shifted into the R (Re-verse) position, the monitor display shows theview to the rear of the vehicle.WARNING●

● Make sure that the liftgate is securelyclose when backing up.● Do not put anything on the rearviewcamera. The rearview camera is in-stalled above th

MEMO0-10 Illustrated table of contents

ADJUSTING THE SCREEN1. While on a RearView Monitor screen, touchthe touch screen display. The Camera Set-tings screen will come up.2. Touch the Displa

the hill is the place䊊B. Note that any object onthe hill is further than it appears on the monitor.Backing up on a steep downhillWhen backing up the v

Backing up near a projecting objectThe vehicle may seem to nearly clear the object inthe display. However, the vehicle may hit theobject if it project

● If dirt, rain or snow accumulates on the cam-era, the RearView Monitor may not displayobject clearly. Clean the camera.● Do not use alcohol, benzine

● Front-Side ViewThe view around and ahead of the frontpassenger’s side wheel.● Front ViewAn approximately 150–degree view of thefront of the vehicle.

● The cameras are installed on the frontgrille, the outside mirrors and above therear license plate. Do not put anythingon the cameras.● When washing

Front and rear viewGuiding lines, which indicate the vehicle widthand distance to objects with reference to thevehicle body line䊊A, are displayed on t

Bird’s-eye viewThe bird’s-eye view shows the overhead view ofthe vehicle, which helps confirm the vehicle po-sition and the predicted course to a park

Front-side viewGuiding linesGuiding lines that indicate the width and the frontend of the vehicle are displayed on the monitor.The front-of-vehicle li

the hill is the place䊊B. Note that any object onthe hill is further than it appears on the monitor.Backing up on a steep downhillWhen backing up the v

Welcome to the growing family of new NISSANowners. This vehicle is delivered to you withconfidence. It was produced using the latesttechniques and str

1 Safety—Seats, seat belts andsupplemental restraint systemSeats ...1-2Front manual seat adjustment(if so equ

Backing up near a projecting objectThe predicted course lines䊊Ado not touch theobject in the display. However, the vehicle may hitthe object if it pro

● If dirt, rain or snow accumulates on the cam-era, the RearView Monitor may not displayobject clearly. Clean the camera.● Do not use alcohol, benzine

WARNING● The MOD system is not a substitute forproper vehicle operation and is not de-signed to prevent contact with the ob-jects surrounding the vehi

When the MOD system detects moving objectsnear the vehicle, the yellow frame will be dis-played on the view where the objects are de-tected and a chim

To set the MOD system so that it remains off at alltimes, use the camera settings menu. For addi-tional information, refer to “Around View® Moni-tor s

VIEW MALFUNCTIONWhen the “!” icon is displayed on the screen,there are abnormal conditions in the AroundView® Monitor. This will not hinder normal dri

● When the temperature is extremely high orlow, the screen may not display objectsclearly. This is not a malfunction.● When strong light directly shin

1. Temperature control dial (driver’s side)/AUTO button2. ON-OFF button3. Display screen4. MODE (manual air flow control) button5. Temperature control

9.(fan speed control) buttons10.REAR (window and outside mirror(if so equipped) defroster) button11.FRONT (defroster) buttonWARNING● The air condition

Dehumidified defrosting or defogging1. Press the front defroster button on.The indicator light on the button will comeon.2. Turn the temperature contr

WARNING● Do not ride in a moving vehicle whenthe seatback is reclined. This can bedangerous. The shoulder belt will notbe against your body. In an acc

OPERATING TIPS● When the engine coolant temperature andoutside air temperature are low, the air flowfrom the foot outlets may not operate for amaximum

RADIOWith the ignition placed in the ACC or ON posi-tion, press the(power) button/VOL (vol-ume) control knob to turn the radio on. If youlisten to the

SATELLITE RADIO RECEPTIONWhen the satellite radio is used for the first timeor the battery has been replaced, the satelliteradio may not work properly

● Do not expose the CD to direct sun-light.● CDs that are in poor condition or aredirty, scratched or covered with finger-prints may not work properly

● Sampling frequency — Sampling frequencyis the rate at which the samples of a signalare converted from analog to digital (A/Dconversion) per second.●

Specification chartSupported media CD, CD-R, CD-RWSupported file systems ISO9660 LEVEL1, ISO9660 LEVEL2, Apple ISO, Romeo, Joliet * ISO9660 Level 3 (p

Troubleshooting guideSymptom Cause and CountermeasureCannot playCheck if the disc was inserted correctly.Check if the disc is scratched or dirty.Check

USB (Universal Serial Bus)Connection PortWARNINGDo not connect, disconnect, or operate theUSB device while driving. Doing so can bea distraction. If d

Bluetooth® streaming audio● Some Bluetooth® audio devices may not berecognized by the in-vehicle audio system.● It is necessary to set up the wireless

FM/AM/SAT RADIO WITHCOMPACT DISC (CD) PLAYER (if soequipped)1.CD eject button2. XM button*3. Display screen4. CD insert slot5.SEEK button6. SCAN butto

Forward and backwardPull the center of the bar up and hold it while youslide the seat forward or backward to the desiredposition. Release the bar to l

Audio main operation(power) button / VOL (volume) con-trol knobPlace the ignition switch in the ACC or ON positionand press the(power) button while th

APPS buttonPress the APPS button to launch the Smart-phone Integration Mode. For additional informa-tion, refer to “NissanConnectSMwith MobileApps” in

3. The channel indicator will then come on andthe sound will resume. Programming is nowcomplete.4. Other buttons can be set in the same man-ner.If the

RDM (random) buttonWhen the RDM (random) button is pressed whilea compact disc is playing, the play pattern can bechanged as follows:CD:1 Disc Random

USB (Universal Serial Bus)CONNECTION PORT (modelswithout Navigation System) (if soequipped)Connecting a device to the USBConnection PortWARNINGDo not

jack located in the center console, the MEDIAbutton toggles between the three sources.Play informationInformation about the audio files being playedca

iPod®* PLAYER OPERATIONWITHOUT NAVIGATION SYSTEM (ifso equipped)Connecting iPod®WARNINGDo not connect, disconnect, or operate theUSB device while driv

● iPod® nano - 4th generation (firmware ver-sion 1.0.4 or later)● iPod® nano - 5th generation (firmware ver-sion 1.0.2 or later)● iPod® nano - 6th gen

BACK buttonWhen the BACK button is pressed, it returns tothe previous menu.BLUETOOTH® STREAMING AUDIOWITHOUT NAVIGATION SYSTEM (ifso equipped)If you h

CD CARE AND CLEANING● Handle a CD by its edges. Do not bend thedisc. Never touch the surface of the disc.● Always place the discs in the storage casew

FRONT POWER SEAT ADJUSTMENT(if so equipped)Operating tips● The power seat motor has an auto-resetoverload protection circuit. If the motorstops during

Push the source select switch to change themode in the following sequence:AM → FM → XM → USB/iPod®*→ Bluetooth®Audio* → AUX* → AM.* These modes are on

This vehicle is equipped with NissanConnectSMMobile Apps. This allows many compatibleSmartphone applications to be displayed andeasily controlled thro

CAUTION● Keep the antenna as far away as pos-sible from the electronic controlmodules.● Keep the antenna wire more than 8 in(20 cm) away from the elec

Your NISSAN is equipped with the Bluetooth®Hands-Free Phone System. If you have a com-patible Bluetooth® enabled cellular phone, youcan set up the wir

● You will not be able to use a hands-freephone under the following conditions:– Your vehicle is outside of the cellular ser-vice area.– Your vehicle

InitializationWhen the ignition switch is placed in the ONposition, NISSAN Voice Recognition is initialized,which takes a few seconds. If thebutton is

CONTROL BUTTONSThe control buttons for the Bluetooth® Hands-Free Phone System are located on the steeringwheel.PHONE/SENDPress thebutton to initiatea

To connect a phone to the Bluetooth® Hands-Free Phone System:1. Press the SETTING button.2. Use the TUNE/SCROLL knob to select“Bluetooth” and then pre

VOICE COMMANDSVoice commands can be used to operate theBluetooth® Hands-Free Phone System. Pressthebutton and say “Phone” to bring up thephone command

● Outgoing CallsSpeak this command to list the last fiveoutgoing calls from the vehicle. If the callwas to an entry in the phonebook, the namewill be

Seat lifter (driver’s seat)Push the front or rear end of the switch up ordown to adjust the angle and height of the seatcushion.Lumbar support (driver

RECEIVING A CALLWhen a call is received by the phone connectedto the vehicle’s Bluetooth® Hands-Free PhoneSystem, the call information is displayed on

NOTE:This feature is automatically disabled if theconnected device does not support the Mes-sage Access Profile (MAP). For additionalinformation, refe

● Previous TextSpeak this command to move to the previ-ous text message (if available).● Next TextSpeak this command to move to the next textmessage (

● New Text SoundSelect to adjust the volume of the sound thatplays when a new text is received by a phoneconnected to the Bluetooth® Hands-FreePhone S

MEMODisplay screen, heater, air conditioner, audio and phone systems 4-63

5 Starting and drivingPrecautions when starting and driving...5-2Exhaust gas (carbon monoxide) ...5-2Three-way catalyst...

Break-in schedule ...5-59Fuel efficient driving tips...5-59Increasing fuel economy...

WARNING● Do not leave children or adults whowould normally require the assistanceof others alone in your vehicle. Petsshould also not be left alone. T

WARNING● The exhaust gas and the exhaust sys-tem are very hot. Keep people, animalsor flammable materials away from theexhaust system components.● Do

Additional information:● The TPMS does not monitor the tirepressure of the spare tire.● The TPMS will activate only when the vehicleis driven at speed

RecliningPull the reclining strap䊊Aand position the seat-back at the desired angle. Release the recliningstrap after positioning the seat at the desir

● When a spare tire is mounted or a wheelis replaced, tire pressure will not beindicated, the TPMS will not functionand the low tire pressure warning

Operation:1. Add air to the tire.2. After a few seconds, the hazard indicatorswill start flashing.3. When the designated pressure is reached,the horn

slide sideways. Be attentive at all times, andavoid driving when tired. Never drive when underthe influence of alcohol or drugs (including pre-scripti

3. When appropriate, slowly release the accel-erator pedal to gradually slow the vehicle.4. Gradually steer the vehicle to a safe locationoff the road

● Do not shift gears while driving ondownhill grades as this could causeloss of control of the vehicle.● Stay alert when driving to the top of ahill.

● If at all possible, avoid sharp turningmaneuvers, particularly at high speeds.Your NISSAN vehicle has a higher cen-ter of gravity than a passenger c

When the ignition switch is pushed without de-pressing the brake pedal, the ignition switch willilluminate.If the ignition switch is in the LOCK or OF

The operating range of the engine start functionis inside of the vehicle䊊1.● The luggage area is not included in the op-erating range, but the Intelli

EMERGENCY ENGINE SHUT OFFTo shut off the engine in an emergency situationwhile driving, perform the following procedure:– Rapidly push the push-button

NISSAN VEHICLE IMMOBILIZERSYSTEMThe NISSAN Vehicle Immobilizer system will notallow the engine to start without the use of theregistered key.If the en

FLEXIBLE SEATINGWARNING● Never allow anyone to ride in the cargoarea or on the rear seats when they arein the fold-down position. In a collision,peopl

the accelerator pedal by depressing thebrake pedal and pushing the push-buttonignition switch to start the engine. If theengine starts, but fails to r

2. Keep the foot brake pedal depressed andmove the shift lever to a driving position.3. Release the parking brake and foot brakepedal, and then gradua

CAUTIONUse the P (Park) or R (Reverse) positiononly when the vehicle is completelystopped.P (Park)CAUTIONTo prevent transmission damage, use theP (Par

5. Press the shift lever button and move theshift lever to the N (Neutral) position whileholding down the shift lock release. Thevehicle may be moved

WARNING● Be sure the parking brake is fully re-leased before driving. Failure to do socan cause brake failure and lead to anaccident.● Do not release

The BSW system uses radar sensors䊊1in-stalled near the rear bumper to detect other ve-hicles in an adjacent lane.The radar sensors can detect vehicles

The brightness of the BSW indicator light isadjusted automatically depending on the bright-ness of the ambient light.A chime sounds if the radar senso

or fog. The blocked condition may also be causedby objects such as ice, frost or dirt obstructingthe radar sensors.Action to take:When the above condi

BSW DRIVING SITUATIONSAnother vehicle approaching frombehindIllustration 1: The Blind Spot Warning indicatorlight illuminates if a vehicle enters the

Overtaking another vehicleIllustration 4: The Blind Spot Warning indicatorlight illuminates if you overtake a vehicle and thatvehicle stays in the det

To fold down the seatbacks:1. Pull the strap on the rear seat.or2. Pull the lever beside the cargo area and foldthe seat back.To return the seatbacks:

NOTE:Illustration 6: When overtaking several ve-hicles in a row, the vehicles after the firstvehicle may not be detected if they aretraveling close to

Illustration 8: If the driver activates the turn signalwhile another vehicle is in the detection zone theBlind Spot Warning indicator light flashes an

The RCTA system uses radar sensors䊊1in-stalled on both sides near the rear bumper todetect an approaching vehicle.The radar sensors䊊1detect an approac

RCTA SYSTEM PRECAUTIONSWARNING● Always check surroundings and turn tocheck what is behind you before back-ing up. The radar sensors detect ap-proachin

– Illustration d: When an approachingvehicle turns into your vehicle’s park-ing lot aisle.– Illustration e: When the angle formedby your vehicle and a

RCTA temporarily not availableWhen radar blockage is detected, the system willbe deactivated automatically. The “Side RadarObstruction” warning messag

RADAR MAINTENANCEThe two radar sensors䊊1for the BSW andRCTA systems are located near the rear bumper.Always keep the area near the radar sensorsclean.

1. RES/+ switch2. SET/- switch3. ON/OFF switch4. CANCEL switchPRECAUTIONS ON CRUISECONTROL● If the cruise control system malfunctions, itcancels autom

To reset at a faster cruising speed, use one ofthe following three methods.● Depress the accelerator pedal. When thevehicle attains the desired speed,

● Always drive carefully and attentivelywhen using ICC system. Read and un-derstand the Owner’s Manual thor-oughly before using the ICC system. Toavoi

If the control unit detects any obstacle or mal-functions while in the power operation, a beepsounds for 4 seconds and the seatback will re-turn to th

WARNING● As there is a performance limit to thedistance control function, never relysolely on the Intelligent Cruise Controlsystem. This system does n

ICC OPERATIONAlways pay attention to the operation of the ve-hicle and be ready to manually control the properfollowing distance. The ICC system may n

● When there is a vehicle traveling ahead, theICC system adjusts the speed to maintainthe distance, selected by driver, from thevehicle ahead. The adj

When driving on some roads, such as winding,hilly, curved, narrow roads, or roads which areunder construction, the ICC sensor may detectvehicles in a

ICC switchThe system is operated by the CRUISE ON/OFFswitch and four control switches, all mounted onthe steering wheel.1. RES/ACCELERATE (+) switch:R

● ICC system SET indicator (green): Indi-cates that the cruising speed is set.● ICC system warning (orange): Indicatesthat if there is a malfunction i

● When the shift lever is not in the D (Drive) orManual mode● When the parking brake is applied● When the brakes are operated by the driverWhen the SE

The stoplights of the vehicle come on whenbraking is performed by the ICC system.When the brake operates, a noise may beheard. This is not a malfuncti

To reset at a slower cruising speed, use oneof the following methods:● Lightly tap the brake pedal. When the ve-hicle attains the desired speed, push

Approach warningIf your vehicle comes closer to the vehicle aheaddue to rapid deceleration of that vehicle or ifanother vehicle cuts in, the system wa

The illustration shows the seating positionsequipped with head restraints/headrests.䉱 Indicates the seating position is equipped witha head restraint.

Warning light and displayCondition A:Under the following conditions, the ICC system isautomatically canceled. The chime will sound andthe system will

Action to take:If the warning light comes on, park the vehicle in asafe place. Turn the engine off, restart the engine,resume driving and set the ICC

User Manual statement according to §15.21:Changes or modifications made to this equip-ment not expressly approved by Robert BOSCHGmbH may void the FCC

The predictive forward collision warning systemcan help alert the driver when there is a suddenbraking of a second vehicle traveling in front ofthe ve

WARNING● The predictive forward collision warn-ing system helps warn the driver beforea collision but will not avoid a collision.It is the driver’s re

WARNING● The predictive forward collision warn-ing system helps warn the driver beforea collision but will not avoid a collision.It is the driver’s re

LSD2266Starting and driving 5-51

WARNING● The radar sensor may not detect a sec-ond vehicle when the vehicle ahead isbeing towed.● When the distance to the vehicle aheadis too close,

Action to take:When the above conditions no longer exist, thepredictive forward collision warning system willresume automatically.Condition B:When the

RF Exposure Information according 2.1091 /2.1093 / OET bulletin 65:Radio frequency radiation exposure Information:This equipment complies with FCC rad

For descriptions specified for all-wheel drivemodels, an AWD mark is placed at the beginningof the applicable sections/items.As with other vehicles wi

REMOVEUse the following procedure to remove the headrestraint/headrest:1. Pull the head restraint/headrest up to thehighest position.2. Push and hold

WARNING● The forward emergency braking systemis a supplemental aid to the driver. It isnot a replacement for the driver’s atten-tion to traffic condit

quences if a collision should one be unavoidable.If the driver is handling the steering wheel, accel-erating or braking, the forward emergency brak-in

3. To set the BSW/PFCW system to on or off,use thebuttons to navigate in themenu and use the ENTER button to select orchange an item:● Select “Forward

Action to take:If the warning light (orange) comes on, park thevehicle in a safe location, turn the engine off andrestart the engine. If the warning l

CAUTIONDuring the first 1,200 miles (2,000 km),follow these recommendations to obtainmaximum engine performance and ensurethe future reliability and e

6. Plan for the Shortest Route● Utilize a map or navigation system to de-termine the best route to save time.7. Avoid Idling● Shutting off your engine

If any malfunction occurs in the All-Wheel Drive(AWD) system while the engine is running, mes-sages are displayed in the meter.If the AWD error warnin

The tire size message may be displayed if there isa large difference between the diameters of frontand rear wheels. Pull off the road in a safe area,w

● The powertrain may be damaged if youcontinue driving when the AWD tem-perature or tire size incorrect messagesare displayed● If the AWD high tempera

● HEADED DOWNHILL WITH CURB:䊊ATurn the wheels into the curb and move thevehicle forward until the curb side wheelgently touches the curb.● HEADED UPHI

ADJUSTFor adjustable head restraint/headrestAdjust the head restraint/headrest so the centeris level with the center of your ears. If your earposition

The brake system has two separate hydrauliccircuits. If one circuit malfunctions, you will stillhave braking at two wheels.BRAKE PRECAUTIONSVacuum ass

– When installing a spare tire, makesure that it is the proper size and typeas specified on the Tire and LoadingInformation label. For additional in-f

The Vehicle Dynamic Control (VDC) system usesvarious sensors to monitor driver inputs and ve-hicle motion. Under certain driving conditions,the VDC Sy

● Do not modify the vehicle’s suspension.If suspension parts such as shock ab-sorbers, struts, springs, stabilizer bars,bushings and wheels are not NI

When the vehicle is stopped on a hill, the HillStart Assist system automatically keeps thebrakes applied. This helps prevent the vehiclefrom rolling b

SPECIAL WINTER EQUIPMENTIt is recommended that the following items becarried in the vehicle during winter:● A scraper and stiff-bristled brush to remo

4. Plug the extension cord into a Ground FaultInterrupt (GFI) protected, grounded 110-volt AC (VAC) outlet.5. The engine block heater must be plugged

MEMO5-72 Starting and driving

6 In case of emergencyHazard warning flasher switch ...6-2Emergency engine shut off ...6-2Flat tire ...

Push the switch on to warn other drivers whenyou must stop or park under emergency condi-tions. All turn signal lights flash.WARNING● If stopping for

PRECAUTIONS ON SEAT BELTUSAGEIf you are wearing your seat belt properly ad-justed and you are sitting upright and well back inyour seat with both feet

TIRE PRESSURE MONITORINGSYSTEM (TPMS)This vehicle is equipped with TPMS. It monitorstire pressure of all tires except the spare. Whenthe low tire pres

CHANGING A FLAT TIREIf you have a flat tire, follow the instructions be-low:Stopping the vehicle1. Safely move the vehicle off the road andaway from t

Getting the spare tire and tools1. Open the rear liftgate.2. Pull up on the handle to lift the carpetedfloorboard.3. The jack and tools are located in

5. Remove the jack and tools from the storagearea.6. To remove the spare tire, loosen the bolt byturning counterclockwise.7. Once free, remove the bol

3. Place the sub-woofer in the upper right cor-ner of the trunk, leaning against the rearpassenger side seat.4. Remove the spare tire.5. Once the flat

Jacking up vehicle and removing thedamaged tireWARNING● Never get under the vehicle while it issupported only by the jack. If it is nec-essary to work

Always refer to the proper illustrations for thecorrect placement and jack-up points for yourspecific vehicle model and jack type.Carefully read the c

4. Lower the vehicle slowly until the tiretouches the ground. Then, with the wheelnut wrench, tighten the wheel nuts securelyin the sequence illustrat

● Whenever working on or near a battery,always wear suitable eye protectors (forexample, goggles or industrial safetyspectacles) and remove rings, met

5. Start the engine of the booster vehicle andlet it run for a few minutes.6. Keep the engine speed of the booster ve-hicle at about 2,000 rpm and sta

WARNING● Every person who drives or rides in thisvehicle should use a seat belt at alltimes. Children should be properly re-strained in the rear seat

3. Get out of the vehicle. Look and listen forsteam or coolant escaping from the radiatorbefore opening the hood. If steam or coolantis escaping, turn

For additional information about towing your ve-hicle behind a recreational vehicle (RV), refer to“Flat towing” in the “Technical and ConsumerInformat

CAUTIONDO NOT tow AWD models with any of thewheels on the ground as this may causeserious and expensive damage to thepowertrain.Front-Wheel Drive (FWD

● When towing with the rear wheels onthe ground or on towing dollies, placethe ignition switch in the ON position,and secure the steering wheel in the

7 Appearance and careCleaning exterior ...7-2Washing ...7-2Waxing ...

In order to maintain the appearance of your ve-hicle, it is important to take proper care of it.To protect the paint surfaces, please wash yourvehicle

REMOVING SPOTSRemove tar and oil spots, industrial dust, insects,and tree sap as quickly as possible from thesurface of the paint to avoid lasting dam

Occasionally remove loose dust from the interiortrim, plastic parts and seats using a vacuumcleaner or soft bristled brush. Wipe the vinyl andleather

Floor mat positioning aidThis vehicle includes two driver’s side front floormat bracket hooks, two passenger’s side frontfloor mat bracket hooks and t

TemperatureHigh temperatures accelerate the rate of corro-sion to those parts which are not well ventilated.Air pollutionIndustrial pollution, the pre

WARNING● Always route the shoulder belt overyour shoulder and across your chest.Never put the belt behind your back,under your arm or across your neck

8 Maintenance and do-it-yourselfMaintenance requirements...8-2General maintenance ...8-2Explanation

Your NISSAN is designed to have minimum main-tenance requirements with long service intervalsto save you both time and money. However, someday-to-day

When driving in areas using road salt or othercorrosive materials, check lubrication frequently.Lights* Clean the headlights on a regular basis.Make s

Steering wheel Check for changes in the steer-ing system, such as excessive freeplay, hardsteering or strange noises.Warning lights and chimes Make su

Underbody The underbody is frequently ex-posed to corrosive substances such as thoseused on icy roads or to control dust. It is veryimportant to remov

CAUTION● Do not work under the hood while theengine is hot. Turn the engine off andwait until it cools down.● Avoid contact with used engine oil andco

VQ35DE engine1. Engine coolant reservoir2. Drive belt location3. Engine oil dipstick4. Engine oil filler cap5. Brake fluid reservoir6. Air cleaner7. F

● The life expectancy of the factory-fillcoolant is 105,000 miles (168,000 km) or7 years. Mixing any other type of cool-ant other than Genuine NISSAN

● Avoid direct skin contact with usedcoolant. If skin contact is made, washthoroughly with soap or hand cleaner assoon as possible.● Keep coolant out

CAUTIONOil level should be checked regularly. Op-erating the engine with an insufficientamount of oil can damage the engine, andsuch damage is not cov

SEAT BELT WARNING LIGHTBoth the driver’s and passenger’s front seats areequipped with a seat belt warning light. Thewarning light, located on the inst

WARNING● Prolonged and repeated contact withused engine oil may cause skin cancer.● Try to avoid direct skin contact withused oil. If skin contact is

CHANGING ENGINE OIL FILTER1. Park the vehicle on a level surface and applythe parking brake.2. Turn the engine off.3. Place a large drain pan under th

CAUTION● NISSAN recommends using GenuineNISSAN CVT Fluid NS-3 ONLY inNISSAN CVTs. Do not mix with otherfluids.● Do not use Automatic transmissionfluid

WARNING● Use only new fluid from a sealed con-tainer. Old, inferior or contaminatedfluid may damage the brake system.The use of improper fluids can da

Refill the reservoir more frequently when drivingconditions require an increased amount ofwindshield-washer fluid.Recommended fluid is Genuine NISSAN

● Keep battery out of the reach ofchildren.● Do not tip the battery. Keep the ventcaps tight and the battery level.1. Remove the vent caps with a scre

Vehicles operated in high temperatures or undersevere conditions require frequent checks of thebattery fluid level.JUMP STARTINGIf jump starting is ne

REPLACING SPARK PLUGSIridium-tipped spark plugsIt is not necessary to replace iridium-tipped䊊Aspark plugs as frequently as conventional typespark plug

NOTE:After installing a new air cleaner filter,make sure the air cleaner cover is seated inthe housing and latch the clips.WARNING● Operating the engi

REPLACINGReplace the wiper blades if they are worn.To replace the windshield wiper blades, followthe procedure below:1. Lift the wiper arm away from t

Fastening the seat belts1. Adjust the seat. For additional information,refer to “Seats” in this section.䊊2Slowly pull the seat belt out of the retract

Rear window wiper bladeContact a NISSAN dealer if checking or replace-ment is required.If the brakes do not operate properly, have thebrakes checked b

If any electrical equipment does not operate,check for an open fuse.Fuses are used in the passenger and enginecompartment. Spare fuses are provided an

5. If the fuse is open䊊A, replace it with a newfuse䊊B.6. If a new fuse also opens, have the electricalsystem checked and repaired by a NISSANdealer.Fu

NOTE:The fuse box is located on the driver’s sideof the instrument panel.1. Be sure the ignition switch and the headlightswitch are OFF.2. Pull down o

How to replace the extended storage switch:1. To remove the extended storage switch, besure the ignition switch is in the OFF orLOCK position.2. Be su

4. Close the lid securely as illustrated䊊C䊊D.5. Operate the buttons to check the operation.See a NISSAN dealer if you need assistance forreplacement.F

● High pressure halogen gas is sealedinside the halogen bulb. The bulb maybreak if the glass envelope is scratchedor the bulb is dropped.Fog may tempo

EXTERIOR AND INTERIOR LIGHTSItem Wattage (W) Bulb No.Headlight assembly (Type A) (if so equipped)*High (Halogen) 65 H9Low (Halogen) 55 H11Turn 28/8 74

1. Map light2 Headlight assembly3 Personal light4. Door mirror turn signal light5. Fog light (if so equipped)6. High mounted stoplight7. License plate

The tire pressures should be checkedwhen the tires are cold. The tires areconsidered COLD after the vehicle hasbeen parked for 3 or more hours, or dri

䊊3Position the lap belt portion low and snugon the hips as shown.䊊4Pull the shoulder belt portion toward theretractor to take up extra slack. Be sure

Tire and loading information label䊊1Seating capacity: The maximum num-ber of occupants that can be seatedin the vehicle.䊊2Tire size - refer to “Tire l

Checking tire pressure1. Remove the valve stem cap from thetire.2. Press the pressure gauge squarelyonto the valve stem. Do not press toohard or force

䊊1Tire size (example: P215/65R15 95H)1. P: The “P” indicates the tire is de-signed for passenger vehicles (not alltires have this information).2. Thre

䊊2TIN (Tire Identification Number) for anew tire (example: DOT XX XX XXXXXXX)1. DOT: Abbreviation for the “Depart-ment Of Transportation”. The symbolc

䊊7The word “radial”The word “radial” is shown if the tire hasradial structure.䊊8Manufacturer or brand nameManufacturer or brand name is shown.Other Ti

All season tiresNISSAN specifies All Season tires on some mod-els to provide good performance all year, includ-ing snowy and icy road conditions. All

CHANGING WHEELS AND TIRESTire rotationNISSAN recommends rotating the tires every5,000 miles (8,000 km).For additional information, refer to “Flat tire

● The original tires have built-intread wear indicators. When thewear indicators are visible, thetire(s) should be replaced.● Tires degrade with age a

● When a spare tire is mounted or a wheelis replaced, tire pressure will not beindicated, the TPMS will not functionand the low tire pressure warning

WARNING● The spare tire should be used for emer-gency use only. It should be replacedwith the standard tire at the first oppor-tunity to avoid possibl

To increase your confidence in the seat belts,check the operation as follows:● Grasp the shoulder belt and pull forwardquickly. The retractor should l

9 Technical and consumer informationRecommended fluids/lubricants and capacities ...9-2Recommended fuel ...9-4Engine oil

The following are approximate capacities. The actual refill capacities may be slightly different. When refilling, follow the proceduredescribed in the

Capacity (Approximate) Recommended Fluids and LubricantsUS measure Imp measure LiterTransfer oil — — —• Genuine NISSAN Differential Oil Hypoid Super G

RECOMMENDED FUELUse unleaded regular gasoline with an octanerating of at least 87 AKI (Anti-Knock Index) num-ber (Research octane number 91).CAUTION●

● If a methanol blend is used, it shouldcontain no more than 5% methanol(methyl alcohol, wood alcohol). Itshould also contain a suitable amountof appr

ENGINE OIL AND OIL FILTERRECOMMENDATIONSSelecting the correct oilIt is essential to choose the correct grade, qualityand viscosity engine oil to ensur

Your engine was filled with a high-quality engineoil when it was built. You do not have to changethe oil before the first recommended changeinterval.

ENGINEModel VQ35DEType Gasoline, 4-cycle, DOHCCylinder arrangement 6-cylinder, V-block, Slanted at 60°Bore x Stroke in (mm) 3.760 x 3.205 (95.5 x 81.4

WHEELS AND TIRESWheel type Offset: in (mm) SizeAluminum 1.97 (50) 18 x 7.5J1.97 (50) 20 x 7.5JSpare wheel-steel 0.99 (25) 18 x 4TTire size 235/65R18Ti

When planning to drive your NISSAN ve-hicle in another country, you should first findout if the fuel available is suitable for your vehi-cle’s engine.

Stowing the rear center seat beltWhen folding down the rear seat, the rear centerseat belt can be retracted into a stowed positionas follows:1. Hold t

ENGINE SERIAL NUMBERThe number is stamped on the engine as shown.F.M.V.S.S./C.M.V.S.S.CERTIFICATION LABELThe Federal/Canadian Motor Vehicle SafetyStan

TIRE AND LOADING INFORMATIONLABELThe cold tire pressure is shown on the Tire andLoading Information label. The label is located asshown.AIR CONDITIONE

WARNING● It is extremely dangerous to ridein a cargo area inside a vehicle. Ina collision, people riding in theseareas are more likely to be seri-ousl

To get “the combined weight of occu-pants and cargo”, add the weight of alloccupants, then add the total luggageweight. Examples are shown in the foll

Steps for determining correct loadlimit1. Locate the statement “The combinedweight of occupants and cargoshould never exceed XXX lbs or XXXkg” on your

WARNING● Properly secure all cargo with ropes orstraps to help prevent it from sliding orshifting. Do not place cargo higher thanthe seatbacks. In a s

WARNINGOverloading or improper loading of atrailer and its cargo can adversely affectvehicle handling, braking and perfor-mance and may lead to accide

Temperature conditions can also affect towing.For example, towing a heavy trailer in high outsidetemperatures on graded roads can affect engineperform

Towing capacities are calculated assuming abase vehicle with driver and any options requiredto achieve the rating. Additional passengers,cargo and/or

The available towing capacity may be less thanthe maximum towing capacity due to the passen-ger and cargo load in the vehicle.Remember to keep trailer

IMPORTANT INFORMATION ABOUTTHIS MANUALYou will see various symbols in this manual. Theyare used in the following ways:WARNINGThis is used to indicate

Attaching the center seat beltAlways be sure the center seat belt connectortongue and connector buckle are attached. Dis-connect only when folding dow

TOWING LOAD/SPECIFICATIONTOWING LOAD/SPECIFICATION CHARTU.S. and CanadaMaximum Towing Capacity*1 1,500 lb.(680 kg)Maximum Tongue Load 150 lb.(68 kg)Ma

WARNINGTrailer hitch components have specificweight ratings. Your vehicle may be ca-pable of towing a trailer heavier than theweight rating of the hit

WARNINGProperly adjust the weight distributinghitch so the rear of the bumper is nohigher than the measured referenceheight when the trailer is attach

Pre-towing tips● Be certain your vehicle maintains a levelposition when a loaded and/or unloadedtrailer is hitched. Do not drive the vehicle if ithas

5. Drive slowly until the vehicle and trailer areclear from the blocks.6. Apply and hold the brake pedal.7. Have someone retrieve and store the blocks

● Check your hitch, trailer wiring harness con-nections, and trailer wheel lug nuts after50 miles (80 km) of travel and at every break.● When launchin

DOT (Department of Transportation) QualityGrades: All passenger car tires must conform tofederal safety requirements in addition to thesegrades.Qualit

Your NISSAN vehicle is covered by the followingemission warranties:For USA1. Emission Defects Warranty2. Emissions Performance WarrantyDetails of this

https://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/PCDB-BDPP/fc-cp.aspx?lang=fra(French speakers)Additional information concerning motorvehicle safety may be obta

This vehicle is equipped with an Event Data Re-corder (EDR). The main purpose of an EDR is torecord, in certain crash or near crash-like situa-tions,

Shoulder belt height adjustment (frontseats)The shoulder belt anchor height should be ad-justed to the position best for you. For additionalinformatio

10 IndexAAir bag (See supplemental restraintsystem)...1-47Air bag systemFront (See supplemental front impact air bagsystem)...

CD care and cleaning ...4-48CD player (See audio system) ...4-41Check tire pressure ...2-22Child restraints ...1-23,1

Frontseats...1-2FuelCapacities and recommendedfuel/lubricants ...9-2Fuel economy ...5-60Fuel-filler door

C.M.V.S.S. certification label ...9-11Emissioncontrolinformationlabel...9-11Engine serial number ...9-11F.M.V.S.S. certification label

Owner’s manual/service manual orderinformation ...9-30PParkingParking brake operation ...5-19Parking/parking on hills ...

Specifications ...9-8Speedometer ...2-4Spotlights(Seemaplight) ...2-50SRS warning label ...1-65St

VVanity mirror ...3-31Vehicledimensionsandweights...9-9Vehicle dynamic control (VDC) off switch . . .2-37Vehicle dynamic control

RECOMMENDED FUELUse unleaded regular gasoline with an octanerating of at least 87 AKI (Anti-Knock Index) num-ber (Research octane number 91).CAUTION●

®2015 MURANOOWNER’S MANUALFor your safety, read carefully and keep in this vehicle.2015 NISSAN MURANO Z52-DZ52-DPrinting : September 2014 (01)Public

See a NISSAN dealer for assistance with pur-chasing an extender if an extender is required.WARNING● Only NISSAN seat belt extenders, madeby the same c

There are three basic types of child restraintsystems:● Rear-facing child restraints● Forward-facing child restraints● Booster seatsThe proper restrai

properly, the booster seat should raise the childso that the shoulder belt is properly positionedacross the chest and the top, middle portion ofthe sh

– Infants and children should never beheld on anyone’s lap. Even the stron-gest adult cannot resist the forces ofa collision.– Do not put a seat belt

● If the child restraint is compatible with yourvehicle, place your child in the child restraintand check the various adjustments to besure the child

– Inspect the lower anchors by insert-ing your fingers into the lower anchorarea. Feel to make sure there are noobstructions over the anchors suchas s

Installing child restraint LATCH loweranchor attachmentsLATCH compatible child restraints include tworigid or webbing-mounted attachments that canbe c

䊊1Top tether strap䊊2Anchor pointTop tether anchor point locationsAnchor points are located in the following loca-tions:● Rear bench seat on the back s

BLUETOOTH® is atrademark owned byBluetooth SIG, Inc.and licensed toVisteon.SiriusXM® servicesrequire a subscriptionafter trial period andare sold sepa

3. For child restraints that are equipped withwebbing-mounted attachments, remove anyadditional slack from the anchor attach-ments. Press downward and

5. Check to make sure the child restraint isproperly secured prior to each use. If thechild restraint is loose, repeat steps 2through 4.REAR-FACING CH

For additional information, refer to all Warningsand Cautions in the “Child safety” and “Childrestraints” sections of this manual before install-ing a

3. Pull the shoulder belt until the belt is fullyextended. At this time, the seat belt retractoris in the ALR mode (child restraint mode). Itreverts t

6. After attaching the child restraint, test it be-fore you place the child in it. Push it from sideto side while holding the child restraint nearthe

2. Secure the child restraint anchor attach-ments to the LATCH lower anchors. Checkto make sure the LATCH attachment is prop-erly attached to the lowe

4. For child restraints that are equipped withwebbing-mounted attachments, remove anyadditional slack from the anchor attach-ments. Press downward and

䊊1Top tether strap䊊2Anchor pointInstalling top tether strapThe child restraint top tether strap must be usedwhen installing the child restraint with t

FORWARD-FACING CHILDRESTRAINT INSTALLATION USINGTHE SEAT BELTSWARNINGThe three-point seat belt with AutomaticLocking Retractor (ALR) must be usedwhen

If the seating position does not have anadjustable head restraint/headrest and it isinterfering with the proper child restraint fit,try another seatin

NISSAN CARES...Both NISSAN and your NISSAN dealer are dedicated to serving all your automotive needs. Your satisfaction with your vehicle and your NIS

5. Allow the seat belt to retract. Pull up on theshoulder belt to remove any slack in the belt.6. Remove any additional slack from the seatbelt; press

9. Check to make sure the child restraint isproperly secured prior to each use. If theseat belt is not locked, repeat steps 2through 8.10. If the chil

Rear bench seatOUTBOARD SEATING POSITIONS1. Remove the head restraint/headrest andstore it in a secure place. Be sure to reinstallthe head restraint/h

A. Low back booster seatB. High back booster seatBooster seats of various sizes are offered byseveral manufacturers. When selecting anybooster seat, k

● Make sure the child’s head will be properlysupported by the booster seat or vehicleseat. The seatback must be at or above thecenter of the child’s e

3. The booster seat should be positioned onthe vehicle seat so that it is stable.If necessary, adjust or remove the headrestraint/headrest to obtain t

PRECAUTIONS ON SRSThis SRS section contains important informationconcerning the following systems:● Driver and passenger supplemental front-impact air

WARNING● The front air bags ordinarily will notinflate in the event of a side impact, rearimpact, rollover, or lower severity fron-tal collision. Alwa

WARNING● Never let children ride unrestrained orextend their hands or face out of thewindow. Do not attempt to hold them inyour lap or arms. Some exam

ARS1042 ARS1043 ARS10441-50 Safety—Seats, seat belts and supplemental restraint system

WARNING● Children may be severely injured orkilled when the front air bags, side airbags or curtain air bags inflate if theyare not properly restraine

WARNING● The seat belts, the side air bags andcurtain air bags are most effective whenyou are sitting well back and upright inthe seat with both feet

WARNING● When sitting in the rear bench seat, donot hold onto the seatback of the frontseat. If the side air bag inflates, you maybe seriously injured

NISSAN Advanced Air Bag System(front seats)1. Supplemental front-impact air bag modules2. Air bag Control Unit (ACU)3. Occupant Classification Sensor

WARNINGTo ensure proper operation of the passen-ger’s advanced air bag system, please ob-serve the following items.● Do not allow a passenger in the r

ditions, depending on the weight detected on thepassenger seat and how the seat belt is used. Ifthe front passenger air bag is OFF, the passengerair b

Status lightThe front passenger seat is equipped with anOccupant Classification Sensor (weight sensor)that turns the front passenger air bag on or off

by the regulations. Failing to properly securechild restraints and to use the ALR mode mayallow the restraint to tip or move in a collision orsudden s

Steps1. Adjust the seat as outlined in the “Seats”section of the Owner’s Manual. Sit upright,leaning against the seat back, and centeredon the seat cu

● An object placed under the front passen-ger’s seat.● An object placed between the seat cushionand center console or between the seatcushion and the

Table ofContentsIllustrated table of contentsSafety—Seats, seat belts and supplemental restraint systemInstruments and controlsPre-driving checks and

● No unauthorized changes should bemade to any components or wiring ofthe supplemental air bag system. This isto prevent accidental inflation of thesu

Front seat-mounted side-impactsupplemental air bag and roof-mounted curtain side-impact androllover supplemental air bag systemsThe side air bags are

WARNING● Do not place any objects near the seat-back of the front seats. Also, do notplace any objects (an umbrella, bag,etc.) between the front door

When the knee air bag inflates, a fairly loud noisemay be heard, followed by release of smoke. Thissmoke is not harmful and does not indicate a fire.C

● No unauthorized changes should bemade to any components or wiring ofthe pretensioner system. This is to pre-vent damage to or accidental activationo

WARNINGExtreme Hazard! Do not use a rear-facingchild restraint on a seat protected by an airbag in front of it!SUPPLEMENTAL AIR BAGWARNING LIGHTThe su

Repair and replacement procedureThe front air bags, side air bags, curtain air bags,knee air bag and pretensioners are designed toinflate on a one-tim

2 Instruments and controlsInstrument panel...2-2Meters and gauges ...2-3Speedometer and o

Roof rack (if so equipped) ...2-43Windows ...2-44Power windows ...

1. Vent (P. 4-25)2. Headlight/fog light (if so equipped)/turnsignal switch (P. 2-29)3. Supplemental front-impact air bag(P. 1-47)4. Meters, gauges, wa

17. Cruise control main/Intelligent CruiseControl (ICC) (if so equipped) setswitches (P. 5-32)18. Driver supplemental knee air bag(P. 1-47)19. Bluetoo

SPEEDOMETER AND ODOMETERSpeedometerThe speedometer indicates vehicle speed.Odometer/Twin trip odometerThe odometer and the twin trip odometer䊊1aredisp

ENGINE COOLANT TEMPERATUREGAUGEThe gauge indicates the engine coolant tempera-ture. The engine coolant temperature is within thenormal range䊊1when the

The indicates that the fuel-filler door islocated on the driver’s side of the vehicle.CAUTION● If the vehicle runs out of fuel, theMalfunction Indicat

or Anti-lock Braking System (ABS)warning lightMaster warning light Malfunction Indicator Light (MIL)or Brake warning lightPower steering warning light

or Anti-lock BrakingSystem (ABS)warning lightWhen the ignition switch is placed in the ONposition, the ABS warning light illuminates andthen turns off

CAUTION● Do not continue driving if the generatorbelt is loose, broken or missing.Engine oil pressure warninglightThis light warns of low engine oil p

TPMS malfunction:If the TPMS is not functioning properly, the lowtire pressure warning light will flash for approxi-mately one minute when the ignitio

Master warning lightWhen the ignition switch is in the ON position,the master warning light illuminates if any of thefollowing are displayed on the ve

Unless checked and repaired, the supplementalrestraint system (air bag system) and/or the seatbelts with pretensioner system may not functionproperly.