REMOVING COVERS FROM REAR
PARCEL SHELF
Remove the top tether anchor cover or key cylin-
der cover as follows:
1. Lift the cover to the full open position.
2. Rotate the cover in the direction shown,
disengaging the hinge at
䊊
1
and slide the
second pin from the hinge
䊊
2
and remove
the cover.
INSTALLING COVERS TO REAR
PARCEL SHELF
CAUTION
Make sure that the hinge is completely
aligned with the pin. If the pin is forced
into position, it may break.
Install the top tether anchor cover or key cylinder
cover as follows:
1. With the pin on one end kept free of its hinge
䊊
1
, align the pin of the other end and slide it
into the hinge
䊊
2
.
LDI2009 LDI2010 LDI2011
Maintenance and do-it-yourself 8-37
Comments to this Manuals