Nissan 2010 Maxima User Manual download pdf (Page 393)

CAUTION

● Do not ground accessories directly to

the battery terminal. Doing so will by-

pass the variable voltage control sys-

tem and the vehicle battery may not

charge completely.

● Use electrical accessories with the en-

gine running to avoid discharging the

vehicle battery.

Your vehicle is equipped with a variable voltage

control system. This system measures the

amount of electrical discharge from the battery

and controls voltage generated by the generator.

The current sensor

s

A

is located near the battery

along the negative battery cable. If you add elec-

trical accessories to your vehicle, be sure to

ground them to a suitable body ground such as

the frame or engine block area.

1. Power steering fluid pump

2. Generator

3. Air conditioner compressor

4. Crankshaft pulley

WARNING

Be sure the ignition switch is in the OFF or

LOCK position before servicing drive belt.

The engine could rotate unexpectedly.

1. Visually inspect the belt for signs of unusual

wear, cuts, fraying or looseness. If the belt is

in poor condition or is loose, have it replaced

or adjusted by a NISSAN dealer.

LDI0694

LDI0564

VARIABLE VOLTAGE CONTROL

SYSTEM

DRIVE BELT

Maintenance and do-it-yourself 8-15

1 2 ... 388 389 390 391 392 393 394 395 396 397 398 ... 456 457

Comments to this Manuals

No comments